Penetration Grades
Penetration supply would be used to provide the gravel surface with the purpose of cold or hot asphalt. In this type of road construction, a thin layer would be used for intracranial development to protect the lower levels from the damp water and air, then the rest of the bed would be joined together and the level would be harder to lie on.
Bitumen penetration analysis 40/50
Test Title Result Standard range TEST Method SP gr @25/25 cc 1.04 Min: 1.01 - Max: 1.06 ISIRI 2956 - ASTM D70 Penetration @25c c-100gr-5s 45.7 Min: 1.01 - Max: 1.06 ISIRI 2950 - ASTM D5 Softening Point 53.2 Min: 1.01 - Max: 1.06 ISIRI 3868 - ASTM D36 Solubility in Trichloroethylene (bitumen content) 99.99 Min: 1.01 - Max: --- ISIRI 2953 - ASTM D4 Ductility @25 cc cm >100 Min: 1.01 - Max: --- ISIRI 3866 - ASTM D113 Flash Point cc 319 Min: 1.01 - Max: --- ISIRI 1175 - ASTM D92 Loss On heating w t% 0.03 Min: --- - Max: 0.2 ISIRI 2957 - ASTM D6 Drop Penetration after loss on heat 8.1 Min: --- - Max: 20 ISIRI 2950 - ASTM D6 & D5 Spot Test Negative Negative ISIRI 2949
Bitumen penetration analysis 60/70
| Test Title | Result | Standard range | TEST Method |
|---|---|---|---|
| SP gr @25/25 cc | 1.02 | Min: 1.01 - Max: 1.06 | ISIRI 2956 - ASTM D70 |
| Penetration @25c c-100gr-5s | 65.4 | Min: 60 - Max: 70 | ISIRI 2950 - ASTM D5 |
| Softening Point | 49.7 | Min: 49 - Max: 56 | ISIRI 3868 - ASTM D36 |
| Solubility in Trichloroethylene (bitumen content) | 99.99 | Min: 99.5 - Max: --- | ISIRI 2953 - ASTM D4 |
| Ductility @25 cc cm | >100 | Min: 100 - Max: --- | ISIRI 3866 - ASTM D113 |
| Flash Point cc | 321 | Min: 232 - Max: --- | ISIRI 1175 - ASTM D92 |
| Loss On heating w t% | 20.0 | Min: --- - Max: 0.2 | ISIRI 2957 - ASTM D6 |
| Drop Penetration after loss on heat | 38. | Min: --- - Max: 20 | ISIRI 2950 - ASTM D6 & D5 |
| Spot Test | Negative | Negative | ISIRI 2949 |
Bitumen penetration analysis 85/100
Test Title Result Standard range TEST Method SP gr @25/25 cc 1.02 Min: 1.01 - Max: 1.06 ISIRI 2956 - ASTM D70 Penetration @25c c-100gr-5s 91.2 Min: 85 - Max: 100 ISIRI 2950 - ASTM D5 Softening Point 45.9 Min: 45 - Max: 0 ISIRI 3868 - ASTM D36 Solubility in Trichloroethylene (bitumen content) 99.98 Min: --- - Max: --- ISIRI 2953 - ASTM D4 Ductility @25 cc cm >100 Min: 100 - Max: --- ISIRI 3866 - ASTM D113 Flash Point cc 322 Min: 232 - Max: --- ISIRI 1175 - ASTM D92 Loss On heating w t% 0.03 Min: --- - Max: 0.2 ISIRI 2957 - ASTM D6 Drop Penetration after loss on heat 8.1 Min: --- - Max: 20 ISIRI 2950 - ASTM D6 & D5 Spot Test Negative Negative ISIRI 2949
Bitumen penetration analysis 120/150
| Test Title | Result | Standard range | TEST Method |
|---|---|---|---|
| SP gr @25/25 cc | 1.013 | Min: 1.01 - Max: 1.06 | ISIRI 2956 - ASTM D70 |
| Penetration @25c c-100gr-5s | 132.0 | Min: 120 - Max: 150 | ISIRI 2950 - ASTM D5 |
| Softening Point | 42 | Min:38 - Max: 0 | ISIRI 3868 - ASTM D36 |
| Solubility in Trichloroethylene (bitumen content) | 99.99 | Min: --- - Max: --- | ISIRI 2953 - ASTM D4 |
| Ductility @25 cc cm | >100 | Min: 100 - Max: --- | ISIRI 3866 - ASTM D113 |
| Flash Point cc | 323 | Min: 232 - Max: --- | ISIRI 1175 - ASTM D92 |
| Loss On heating w t% | 0.03 | Min: --- - Max: 0.2 | ISIRI 2957 - ASTM D6 |
| Drop Penetration after loss on heat | 8.3 | Min: --- - Max: 20 | ISIRI 2950 - ASTM D6 & D5 |
| Spot Test | Negative | Negative | ISIRI 2949 |
Bitumen penetration analysis 200/300
| Test Title | Result | Standard range | TEST Method |
|---|---|---|---|
| SP gr @25/25 cc | 1.011 | Min: 1.01 - Max: 1.06 | ISIRI 2956 - ASTM D70 |
| Penetration @25c c-100gr-5s | 250.0 | Min: 200 - Max: 300 | ISIRI 2950 - ASTM D5 |
| Softening Point | 38 | Min:35 - Max: 40 | ISIRI 3868 - ASTM D36 |
| Solubility in Trichloroethylene (bitumen content) | 99.98 | Min: --- - Max: --- | ISIRI 2953 - ASTM D4 |
| Ductility @25 cc cm | >100 | Min: 100 - Max: --- | ISIRI 3866 - ASTM D113 |
| Flash Point cc | 325 | Min: 232 - Max: --- | ISIRI 1175 - ASTM D92 |
| Loss On heating w t% | 0.04 | Min: --- - Max: 0.2 | ISIRI 2957 - ASTM D6 |
| Drop Penetration after loss on heat | 8.2 | Min: --- - Max: 20 | ISIRI 2950 - ASTM D6 & D5 |
| Spot Test | Negative | Negative | ISIRI 2949 |
